Removal of Chromium from Painting Industry Wastewater Using Bioelectrochemical Fuel Cell Technology
| dc.contributor.advisor | Shimelis, Kebede Kassahun (PhD) | |
| dc.contributor.author | Diriba, Amsalu | |
| dc.date.accessioned | 2021-08-16T08:59:52Z | |
| dc.date.accessioned | 2023-11-10T15:01:12Z | |
| dc.date.available | 2021-08-16T08:59:52Z | |
| dc.date.available | 2023-11-10T15:01:12Z | |
| dc.date.issued | 2021-07 | |
| dc.description.abstract | Chromium is heavy metal that released as waste dominantly from chemical industries and causes chronic and acute health problems on human beings and other living environments. From different industrial sector in Ethiopia Painting industries are developing but their wastewater treatments are not get attention. This was one of the reason to select the sector for the removal of chromium from their wastewater using Bioelectrochemical Fuel Cell Technology (BECFC). The technology is an effective, efficient, and environmental-friendly that remove chromium without using external energy. The methodology can generate electrical energy from wastes that helps it to avoid the cost of energy during treatment. The sub objectives of this research were synthesizing chromium wastewater using APHA methodology, constructing set up of BECFC, enumerating Bacillus Ceruse. And others were investigating the efficiency of the methodology by varying three parameters at three different operational level, using statistical method of RSM optimizing operation parameters and verified on synthetic wastewater. Also characterizing real wastewater and verifying again optimum operation parameters on real wastewater were sub-objectives of the research. BECFC remove chromium from wastewater when electro-active bacterial like Bacillus Cereus metabolize organic waste in anodic chamber and release electrons during the process. Then generated electrons are transferred to the cathodic chamber through the external wire. Then after chromium is reduced, attached on electrode, detached and settle to the bottom of cathodic chamber. To see results of the research, over all above 95% efficiencies of removal of chromium were achieved. The highest efficiency of removal achieved was 99.6% at a concentration of 15 mg/L, pH of 9, and time of treatment 16hrs. The efficiency of optimum operation parameter was 98.1% and current density generated was 17.51mA/m2 with an optimum concentration of 9mg/L, pH 7, and optimum time of 17.357hrs. And the efficiency of removal of chromium from real wastewater of (3400mg/L SS, 2164NTU turbidity, 738mg/L COD and 148mgg/L BOD) was 84%. In conclusion, BECFC is a promising technology, but more research in full facilitated laboratories are requested to make the methodology applicable on real wastewater. | en_US |
| dc.identifier.uri | http://etd.aau.edu.et/handle/12345678/27683 | |
| dc.language.iso | en_US | en_US |
| dc.publisher | Addis Ababa University | en_US |
| dc.subject | Bioelectrochemical | en_US |
| dc.subject | Painting Industry | en_US |
| dc.subject | Chromium Removal | en_US |
| dc.subject | Wastewater | en_US |
| dc.title | Removal of Chromium from Painting Industry Wastewater Using Bioelectrochemical Fuel Cell Technology | en_US |
| dc.type | Thesis | en_US |