Production of Biodiesel from Microalgae
No Thumbnail Available
Date
2010-07
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Addis Ababa University
Abstract
Since petroleum resources are believed to last only for a few decades, alternative sources of
biofuel production should be exploited. In order to replace all the fossil fuels consumed in the
world, other sources of biodiesel which have higher productivity per unit area of land than
vegetable and non edible oilseed feed stocks are required. One of the alternative sources which
falls in to relatively higher productivity per unit area of land (10g/m2/day -50g/m2/day) is the
production of biodiesel from microalgae.
This study focuses on production of biodiesel from microalgae by transesterification reaction.
Algal biomass of symbiotic blue green algae were collected from ARARI. After drying the
biomass, algae oil was extracted by soxhlet extraction method using solvent, hexane. Then,
purification of the oil was performed by degumming, neutralization, and bleaching to facilitate
the characterization and biodiesel production process. The characterization test of the oil
confirmed that oil can be produced from the algal biomass with the acceptable range of pyiscochemical
properties for biodiesel production. Then, biodiesel was produced by base catalyzed
transesterification reaction and characterized by determining density, kinematic viscosity, acid value,
saponification number, flash point and heating value. HPLC analysis was conducted to determine the
conversion of oil to biodiesel. The characteristic test result of the biodiesel showed that the density,
kinematic viscosity, acid value, saponification number, flash point and heating value conforms to all the
standard specifications of ASTM D 6751 and EN 14214, except for its acid value (0.57mgKOH/g)
which is 14 % above the EN 14214 specification.
The result showed that the symbiotic blue green algae in ARARI can be used to produce
biodiesel with acceptable quality. However, the oil yield of the algal biomass was very low
(5.4wt %) when compared with oil contents of algal strains (>15wt %) recommended for
biodiesel production. Therefore, three different pure algal strains were selected and assessed
based on their oil content and productivity with growth parameter requirements of climatic
conditions which conform to the Ethiopian environment particularly to the specific area selected
for cultivation. The results of the investigation showed that the strain Bortyococcus braunii gives
the best result and recommended for cultivation of algal biomass for biodiesel production in
Ethiopia.
Description
Keywords
Process Engineering