Application of Montmorillonite Type Bentonite Clay From Chacha Area as Alternative for Local Construction Material
| dc.contributor.advisor | Abubeker Yimam (PhD) | |
| dc.contributor.advisor | Enatfanta Melaku (Mr.) | |
| dc.contributor.author | Addisu Misgana | |
| dc.date.accessioned | 2024-05-02T06:24:54Z | |
| dc.date.available | 2024-05-02T06:24:54Z | |
| dc.date.issued | 2023-06 | |
| dc.description.abstract | Hollow concrete block are produced from derbanPozolana Portland Cement (PPC), pumice and other aggregates (sand, scoria, gravel and clay). Mixing ratio and composition for HCBs although depend on the availability of materials. It is widely varying among the producers of cottage and industrial scale. However, all producers apply cement as a major constituent for binding. The demand of cement for HCBs and other construction materials is very high while the cement supply is very low. As a result, cost of production and sell price in the market is expensive and becoming not affordable for end users. The objective of this study is to investigate and evaluate the effect in using relatively cheaper bentoniteas cement replacement in HCBs production. Bentonite is available in a bulk when compared to cement. In the process focushas been given for curing and compressive strengthof HCB by varying the amount of cement and bentonite as major constituents in three ways (10kg bentonite replacing 10kg cement, 15 kg bentonite replacing 15 kg cement and 20 kg bentonite replacing 20 kg cement for a single batch /64 HCBs). All HCB samples were produced using 0.84 m3 pumice, 40 liters’ water. In addition silicate analysis (chemical composition) and physical properties (bulk density, moisture content and free swell test) of Chacha clay. Standard Compressive strength tests using (CES24:2013) method for HCBs of six sample replicates with average result on a total of 54 samples tests were made for 14, 21 and 28 age of curing time. For 28days’ age the average compressive strength (N/mm2) of 1.43, 1.27 and 1.23 were achieved by 10%, 15% and 20% bentonite replacement respectively. The compressive strength of HCBs is found to increase with increase of curing age and decreases with increase of the bentonite loading ratio. Generally, replacing of cement with bentonite at 28 days, a 10% bentonite replacement obtained the highest strength value, followed by a 15% bentonite loading ratio and a 20% bentonite loading ratio. | |
| dc.identifier.uri | https://etd.aau.edu.et/handle/123456789/2920 | |
| dc.language.iso | en_US | |
| dc.publisher | Addis Ababa University | |
| dc.subject | Montmorillonite Type Bentonite Clay | |
| dc.subject | Local Construction Material | |
| dc.subject | Chacha Area | |
| dc.title | Application of Montmorillonite Type Bentonite Clay From Chacha Area as Alternative for Local Construction Material | |
| dc.type | Thesis |