|
Addis Ababa University Libraries Electronic Thesis and Dissertations: AAU-ETD! >
Faculty of Science >
Thesis - Material Science >
Please use this identifier to cite or link to this item:
http://hdl.handle.net/123456789/2555
|
| Title: | SOLID STATE PHOTOELECTROCHEMICAL SOLAR ENERGY CONVERSION BASED ON A MIXTURE OF MEH-PPV AND MDMO-PPV |
| Authors: | ANTENEH, WODAJE BAYEH |
| Advisors: | Prof. Teketel Yohannes |
| Keywords: | SOLID STATE PHOTOELECTROCHEMICAL |
| Copyright: | Jun-2010 |
| Date Added: | 4-May-2012 |
| Publisher: | AAU |
| Abstract: | Solid state photoelectrochemical solar energy conversion based on a mixture of MEH-
PPV and MDMO-PPV, coated on ITO glass as light harvesting unit, a solid polymer
electrolyte, POMOE complexed with I3- /I- redox couple and oxidized PEDOT as counter
electrode have been fabricated and studied for its photoresponse behavior. The short
circuit current (Isc), open circuit voltage (Voc), and fill factor (FF) of this mixed polymer
based PEC is higher than that of MEH-PPV based device. A PEC with a structure ITO│
(MEH-PPV:MDMO-PPV)│POMOE│: I3- /I-│PEDOT│ITO produce Voc of 289.7 mV,
Isc of 0.21 A/cm2 and FF of 0.32. The device showed an incident monochromatic photon
to current conversion efficiency (IPCE) of 0.0034% illuminated from front side and
0.00013% illuminated from back side. The dependence of Isc and Voc on incident light
intensity showed both Isc and Voc increases with increasing light intensity. The plot of
logIsc versus logPi yielded straight line with the power factor α is equal to 0.793. Our
results show that mixing of two donor type polymer, PEC show relatively improved
performance when compared with individual MEH-PPV based device. |
| URI: | http://hdl.handle.net/123456789/2555 |
| Appears in: | Thesis - Material Science
|
Items in the AAUL Digital Library are protected by copyright, with all rights reserved, unless otherwise indicated.
|
